110V 30A 3300 Watts WiFi Relay for Light Switch and Water Heater Timer and Pump Control – Support Manual and Remote…

Notice:
1.If your water heater has 2 hot line with 115V for each,can’t use;
2.The smart switch must work with mesh router or single 2.4GHz broadcast;
3.This 30amps relay receiver is 433.92MHz, it can be matched with universal remote transmitter which has the same frequency.So you can add more remotes.

The smart switch works effortlessly with Amazon Alexa, Google Assistant and IFTTT to give you hands-free voice control over your devices. Pair the switch with these commands to turn on your lights, your appliances, or an entire room on or off with just the power of your voice.

Control Your Home Remotely The smart switch uses your existing home Wi-Fi network to provide wireless control of lamps, heaters, fans and more – with no subscription or hub required.

Product Specifications:
Voltage: AC85V-250 V,50 / 60 Hz
Load: 250 V / 30 A MAX
Standby Power Consumption: <0.5 W
Working environment: Indoor
Working Temperature: -10℃~45 ℃
Humidity: ≤80% RH
Support: Wifi 2.4 GHz 802.11 b/g/n, 2G / 3G / 4G
Wireless Communication Range: 100 m / 328 ft
Material: V0 flame-retardant material
Dimension: 95 x 55 x 30 mm
Net Weight: 88 g

How to set working mode:Jog-lock(Momentary)/ Self-locking/ Interlock/Manual
1.How to clean code:
* Press the Pairing Button 8 times,light flash and off,cleaning code successfully.
2.How to set the working mode:
* Jog-lock(Momentary):Press “pairing button” 4 times
* Self-locking:Press “pairing button” twice
* Interlock:Press “pairing button” triple times, then press A button ,then B button
3.How to set the wifi mode
Long press the pairing button ,blue light flash,waiting for app maching.

Package Includes:
1x Wifi remote switch
1x High power remote control

30A Wifi relay switch for power on / off : max load 3300W for 110V or 6600W for 220V, 70% use recommended for safe(For example , the switch will work perfect if your device is under 2310 watts)
This wifi timer switch can work with AC 85V – 250V: People use 110V mostly in CA,So you can connect hot line to the “L” port, and neutral line to the “N” port
Do not support device with 2 hot lines : make sure one hot line “In”/”out”,one neutral line “In”/”out” only.(If your water heater has 2 hots with 115V for each,then can’t use this switch)
Main Function: APP control(“eWeLink”) ; remote control;schedule ;timer ; share control
Support DIY smart home system: Lights,water pump, water heater , wall power timer , farm water supply…