The Armor AR350 is a solvent based acrylic wet look sealer that is designed to seal, enhance, and protect a variety of interior and exterior surfaces. It penetrates deep into the surface where it chemically bonds to the pores of the concrete and pavers, creating a long lasting, non-yellowing, breathable finish that enhances dull or faded surfaces by creating a wet look and low gloss finish. The Armor AR350 is manufactured in the USA and can easily be applied with a roller or sprayer to unsealed surfaces, and surfaces previously sealed with a solvent based acrylic. Benefits: Manufactured in the USA Breathable, low VOC Can be applied with a roller or sprayer Non-yellowing and UV resistant Will reduce concrete dusting and deterioration caused by surface abrasion Offers resistance to water, stains, chemicals, and salt damage Offers superior adhesion to a variety of concrete and paver surfaces Will bring out the color in dull or faded concrete and pavers Offers a durable wet look/low gloss finish Self-priming, easy recoat and low maintenance When properly applied can last up to 2-5 years Can be applied to unsealed surfaces, or surfaces previously sealed with a solvent based acrylic. For best results, apply 2 coats, 24 hours apart. Apply in the late afternoon or early evening when air and surface temperatures are declining. Do not apply to red clay brick, slate, tile, flagstone, or other natural stone surfaces. For those surfaces consider the Armor WL550 or Armor SX5000.
Penetrating high solids acrylic coating with unmatched bonding characteristics.
Durable, long lasting, professional grade solvent based acrylic offering superior performance abilities.
Satin sheen wet look finsih. Will bring out color in dulled substrates.
Can be used on poured concrete, stamped concrete, concrete pavers.
1 gallon will cover up to 100 square feet in two coats.